Cisco Linksys SPA9000 - Manual (Page 91)

4-1
Linksys SPA9000 Administrator Guide
Document Version 3.01
C H A P T E R
4
Configuring SPA9000 Features
This chapter describes how to perform the basic configuration for enabling the SPA9000 features. It also
provides detailed explanations of how the system performs each operation, and the parameters
controlling system behavior. This chapter includes the following sections:
• Using the Wizard to Configure SPA9000 Voice Features, page 4-1
• Using Dial Plans, page 4-9
• Basic Call Management, page 4-13
• Managing Call Forwarding, page 4-17
• Managing Call Pickup, page 4-25
• Multicast and Group Paging, page 4-27
• Music On Hold, page 4-28
• Enhancements in Release 5.1, page 4-32
Using the Wizard to Configure SPA9000 Voice Features
You can use the SPA9000 Setup Wizard to enable or configure many of the main voice features. This section,
which describes the options available, includes the following topics:
• Configuring Client Stations, page 4-2
• Configuring Client Extensions, page 4-4
• Configuring Shared Extensions, page 4-5
• Configuring a Call Hunt Group, page 4-6
• Using the Wizard for Localization, page 4-7
For information about configuring the Auto-Attendant, refer to Chapter 5, “Configuring the LVS
Auto-Attendant.”
Note If you use the Setup Wizard after using the administration web server to change the SPA9000
configuration, you may lose any changes to the factory default configuration that were made using the
administration server web pages.