Dell POWEREDGE M1000E - Manual (Page 571)

Fabric OS Message Reference 495
53-1001767-01
Chapter
86
RPCD System Messages
RPCD-1001
Message
<timestamp>, [RPCD-1001], <sequence-number>,, WARNING, <system-name>,
Authentication Error: client \"<IP address>\" has bad credentials: <bad user name
and password pair>
Probable Cause Indicates an authentication error was reported. The specified client IP address has faulty
credentials.
Recommended
Action
Enter the correct user name and password from the Fabric Access API host.
Severity WARNING
RPCD-1002
Message
<timestamp>, [RPCD-1002], <sequence-number>,, WARNING, <system-name>, Missing
certificate file. Secure RPCd is disabled.
Probable Cause Indicates an SSL certificate is missing.
Recommended
Action
To enable RPCD in secure mode, install a valid SSL certificate on the switch.
Severity WARNING
RPCD-1003
Message
<timestamp>, [RPCD-1003], <sequence-number>,, WARNING, <system-name>, Permission
denied accessing certificate file. Secure RPCd is disabled.
Probable Cause Indicates the SSL certificate file configured on the switch could not be accessed because the root
did not have read-level access.
Recommended
Action
Change the file system access level for the certificate to root read-level access.
Severity WARNING