Cooper Bussmann BRICK 6125TD User Manual
Page 29
Title: Engineering Product Specification Telecom Circuit Protector
Revision: L
Printed on: 7/14/2003
Sheet
15
of
18
This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design
applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of
any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a
product has been selected, it should be tested by the user in all possible applications.
11. PACKAGING SPECIFICATION
11.1 SP1/:
10 pieces of fuses on 24mm tape, 8 mm pitch per EIA Standard 481, packaged in a
plastic bag
11.2 SP2/:
50 pieces of fuses on 24mm tape, 8 mm pitch per EIA Standard 481, packaged in a
plastic box
11.3 TR1/:
1000 pieces of fuses on 24mm tape and reeled on a 13 inch (330 mm) reel per EIA
Standard 481, 8 mm pitch
11.4 TR2/:
2500 pieces of fuses on 24mm tape and reeled on a 13 inch (330 mm) reel per EIA
Standard 481, 8 mm pitch
12. PROCESS FLOW CHART
Purchase
Wire (T)
Plate
Wire (T)
Purchase Ceramic
Yarn (T)
Wind Wire
Around Yarn (T)
Cut Element
To Length
Assemble Fuse Components
and Reflow Solder
Overcoat
Terminations
Test
and Pack Fuses
Purchase
Solder Disk
Metallize
Tube Ends
Purchase
Tubes
Purchase
End Plates
Clean End
Plates
Plate
Metalized
Ends’