Viewing status information – Dell PowerVault 124T User Manual
Page 19
Use of all RMU web pages features requires Java Script to be enabled in the user's web browser.
To open the RMU:
1. From your computer, open your Web browser.
2. In the browser's address field, enter the IP address (also see "
IPv6 Addendum
") for your autoloader
(see "
Viewing Ethernet Information
").
The Home page appears in your browser window.
Viewing Status Information
RMU Web Interface Status Pane
1. System Status - provides model and serial number (S/N) of both the autoloader and the drive. This
section also contains the Dell Service Tag number. You will need this number if you call for technical
support.
2. Autoloader - provides status specific to the automation device. Refer to
Front Panel Administration
for information regarding magazine configuration. Refer to
Installation Overview
for information
regarding enabling or disabling the Barcode Scanner.
3. Drive - provides status information specific to the drive. Refer to
TapeAlert Logs
for information
regarding drive Tape Alert flags.