Cisco XR 12410 - Manual (Page 127)

3-45
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
OL-17441-01
Chapter 3 Installing the Cisco XR 12410 Router
Connecting Power to the Router
Connecting Power to an AC-Powered Router
Use the following procedure to connect the AC power cords to the router.
Note Connect each AC power supply to a dedicated power source (branch
circuit). Each AC-input power supply operates between 200 and 240 VAC
and requires at least a 20 A service for North American use, or a 13 A
service for international use. For more information on AC power cords,
see the
“Power Connection Guidelines” section on page 2-13 .
Step 1 Connect each power cable to the AC power connector on the horizontal trough and
secure them with their retention clips (
Figure 3-30 ).
Step 2 Plug each power supply cable into its AC outlet.
Figure 3-30 Connecting Source AC to the AC-Input Power Connector
52645