Connecting to a wall outlet, Warning, Precaution – Sony CCD-TRV66 User Manual
Page 12: Notes, Using a car battery
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 1 Preparing the power supply
Connecting to a wall outlet
When you use your camcorder for a long time, we recommend that you power it from a
wall outlet using the AC power adaptor.
(1)
Open the DC IN jack cover, and cormect the AC power adaptor to the DC IN
jack on your camcorder with the plug's A mark facing up.
(
2
)
Connect the power cord to the AC power adaptor.
(3)
Connect the power cord to a wall outlet.
WARNING
The power cord must only be changed at a qualified service shop.
PRECAUTION
The set is not disconnected from the AC power source (house current) as long as it is
connected to the wall outlet, even if the set itself has been turned off.
Notes
• The AC power adaptor can supply power even if the battery pack is attached to your
camcorder.
• The EXT IN jack has "source priority". This means that the battery pack cannot supply
any power if the power cord is connected to the EX^ IN jack, even when the power
cord is not plugged into a wall outlet.
• Keep the AC power adaptor away from the camcorder if the picture is disturbed.
Using a car battery
Use Sony DC Adaptor/Charger (not supplied).
1 2