Charging the battery pack – Sony CCD-TRV66 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 1 Preparing the power supply
Charging the battery pack
Use the battery pack after charging it for your camcorder.
Your camcorder operates only with the "InfoLITHIUM" battery pack (L series).
"InfoLITHIUM" is a trademark of Sony Corporation.
(1) Open the DC IN jack cover and connect the AC power adaptor supplied with
your camcorder to the DC IN jack with the plug's ▲ mark facing up.
(
2
)
Connect the power cord to the AC power adaptor.
(3)
Connect the power cord to a wall outlet.
(4)
Set the POWER switch to OFF. Charging begins. The remaining battery time is
indicated in minutes on the display window.
When the remaining battery indicator changes to
normal charge
is completed. To
fully charge the battery
(full charge),
leave the battery pack attached for about 1 hour
after normal charge is completed until FULL appears in the display window. Fully
charging the battery allows you to use the battery longer than usual.
-—
■
4
B
POWER
■ICAMERAI
■ OFF
■