Remote commander, Power zoom button (p. 17), To prepare the remote commander – Sony CCD-TRV66 User Manual
Page 80: Notes on the remote commander
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Identifying the parts and controls
Remote Commander
The buttons that have the same name on the Remote Commander as ot\ your camcorder
function identically to the buttons on your camcorder.
|T| Transmitter
a
[2] Video control buttons (p. 25)
[3] DISPLAY button (p 24)
a
You use it in the standby or recording
mode.
Power zoom button (p. 17)
To prepare the Remote Commander
Insert 2 R6 (size AA) batteries by matching the + and - polarities on the batteries to
the + - marks inside the battery compartment.
Notes on the Remote Commander
• Point the remote sensor away from strong light sources such as direct sunlight or
overhead lighting. Otherwise, the Remote Commander may not functton properly.
• Your camcorder works in the commander mode VTR 2. Commander modes
1, 2 and 3 are used to distinguish your camcorder from other Sony VCRs to avoid
remote control misoperation. If you use another Sony VCR in the commander mode
VTR 2, we recommend changing the commander mode or covering the sensor of the
VCR with black paper.
80