Note, When start/stop mode is set to, Note on the bounce function – Sony CCD-TRV66 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Fader function
Note
You cannot use the following functions while using the fader function. Also, you cannot
use the fader function while using the following functions.
- Digital effect
- Low lux mode of PROGRAM AE (Overlap/Wipe function only)
- NightShot +SI
0
W shutter
The date, time indicator and title do not fade in or fade out
Erase them before operating the fader function if they are not needed.
If you do not record anything before operating the wipe or overlap function
Your camcorder stores the image on the tape. As the image is being stored, the WIPE or
OVERLAP indicator flashes quickly, and the picture you are shooting disappears from
the viewfinder. Depending on the tape condition, the picture may not be recorded
dearly.
When START/STOP MODE is set to
You cannot use the fader function.
orSSEC
While using the bounce function, you cannot use the following functions:
- Exposure
- Focus
- Zoom
Note on the bounce function
The BOUNCE indicator does not appear in the following mode or functions:
- D ZOOM is set to ON in the MENU settings
- Wide mode
- Picture effect
-PROGRAM AE
3 4