Sony CCD-TRV66 - Manual (Page 15)

Recording a picture
Adjusting thè LCD screen
To adjust the brightness of the LCD screen, press either of the two buttons on LCD
BRIGHT.
The LCD panel moves about 90 degrees to the viewfinder side and about 210 degrees to
the lens side.
If you turn the LCD panel over so that it faces the other way, the O indicator appears
in the viewfinder
(Mirror mode).
to brighten —
210°
(
+
1-
I o
LJ (T
i
Q 'f 1
to dim —
When closing the LCD panel, set it vertically until it clicks, and swing it into the
camcorder body.
Note
When using the LCD screen except in the mirror mode, the viewfinder automatically
turns off.
When you use the LCD screen outdoors in direct sunlight
The LCD screen may be difficult to see. If this happens, we recommend that you use the
viewfinder.
Picture in the mirror mode
The picture on the LCD is a mirror-image. However, the picture will be normal when
recorded.
During recording In the mirror mode
While recording in the mirror mode, you cannot operate the following buttons: MENU,
TITLE, DATE, and TIME on your camcorder.
Indicators in the mirror mode
• The STBY indicator appears as II# and REC as #. Some of the other indicators
appear mirror-reversed and others are not displayed.
• 'Hie date appears mirror-reversed when the auto date function is working. However,
the date will be normal when recorded.
After recording
(1) Turn STANDBY down to LOCK.
(2) Close the LCD panel.
(3) Eject the cassette.
(4) Set the POWER switch to OFF.
After use your camcorder
Remove the battery pack from your camcorder to avoid turning on the built-in light.
15