Resetting the date and time – Sony CCD-TRV66 User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Resetting the date and time
The clock is set at the factory to Tokyo tinie for the models sold in Japan, and to Hong
Kong, New York or Panama time for other models.
The date and time are held in memory by the lithium battery. If you replace the lithium
battery with the battery pack or other power source connected, you need not reset the
date and time.
You must reset the date and time when the lithium battery becomes dead with no
power source installed.
First, set the year, then the month, the day, the hour and then the minute.
(1) While the camcorder is in the standby mode, press MENU to display the
MENU settings.
(2)
Turn the SEL/PUSH EXEC dial to select a, then press the dial.
(3)
Turn the SEL/PUSH EXEC dial to select CLOCK SET, then press the dial.
(4)
Turn the SEL/PUSH EXEC dial to adjust the desired year, then press the dial.
(5)
Set the month, day and hour by turning the SEL/PUSH EXEC dial and
pressing the dial.
(
6
)
Set the minute by turning the SEL/PUSH EXEC dial and pressing the dial by
the time signal. The clock starts to move.
(7)
Press MENU to make the MENU settings disappear. The time indicator
appears. Press TIME to make the hme indicator disappear.
58