Step 1 preparing the power supply, Installing the battery pack, To remove the battery pack – Sony CCD-TRV66 User Manual
Page 8: After installing the battery pack, Charging the battery pack
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
step 1 Preparing the power supply
Installing the battery pack
Install the battery pack to use your camcorder outdoors.
Slide the battery pack down.
To remove the battery pack
Slide the battery pack out in the direction of the arrow while pressing 1 ВАТТ
RELEASE down.
ВАТТ RELEASE
After installing the battery pack
Do not carry your camcorder by holding the battery pack. If you do so, the battery pack
may slide off your camcorder unintentionally, damaging your camcorder.
Advertising