Making antenna connections – Sony KV-27XBR25 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Making Antenna Connections
Connecting both VHF and UHF antennas
Connecting both VFIF/UHF antennas and
a CATV cable (KV-27XBR35/32XBR35 only)
Use an EAC-66 U/V mixer (not supplied).
1
Prepare the VHF antenna cable using the appropriate
connector (p. 11).
Connect the cable to the U/V mixer.
3
Connect the U/V mixer to the VHF/UHF terminal.
When you use the U/V mixer
Snow and noise may appear in the picture when viewing
cable TV channels over 37 (W + 1).
AUX
§
CATV
cable
TO
CONVERTER
9-
VHF/UHF
VHFAJHF
antenna cable
Note
Do not connect anything to the TO CONVERTER terminal in this
case.
Connecting a cable with a pay cable TV system
converter/decoder
(KV-27XBR35/32XBR35 only)
t-
AUX
§-l
TO
CONVERTER
'0D===|==<1I0^
75-ohm coaxial cable
(not supplied)
VHFAJHF
CATV
cable
Pay cable TV systems use scrambled or encoded signals
and require special converters (decoders) in addition to the
normal cable connection.
* The special converter/decoder will be supplied by the cable
company.
1 2 1
Chapter 1 : Setting Up