Sony KV-27XBR25 - Manual (Page 59)

9 Press A/V WINDOW -f/- to select *‘:30” (minutes); then
press RETURN.
Each time you press A/V WINDOW +/-, the minutes change
b) sequence.
GCHANNEL BLOCK
EVERY SAT
4:30PM .H CH...
?
Set the duration.
setccT^ tfttia txifSnw
To erase a CHANNEL BLOCK setting
Display the CHANNEL BLOCK screen, select the setting
you want to erase, and select a blank space for the day.
The CHANNEL BLOCK setting is erased.
To enter a new CHANNEL BLOCK setting
Display the CHANNEL BLOCK screen and repeat steps
4-10. (You can only set one CHANNEL BLOCK at a time.)
To return to the previous menu
Press A/V WINDOW +/- until the cursor points to
“ Z> MENU."
Then press RETURN.
10 Press A/V WINDOW +/- to select *1” (hour
duration); then press RETURN.
Each time you press AJV WINDOW +/-, the duration
changes from
*/'- "6"in sequence.
GCHANNEL BLOCK
EVERY SAT
4:30PM IH CH...
3
Set the channel.
SCUCI $ unn CIITOQI)
To return to the main menu
Repeat the above, until you reach the main menu.
To return to the normal screen
Press MENU on the Remote Commemder.
Note
If the ON/OFF TIMER Is set for an overlapping time (pp. 55 - 57),
the later time setting takes precedence. For example, If CHANNEL
BLOCK is set for 2:00 PM and ON/OFF TIMER is set for 3:00 PM,
ON/OFF TIMER will take effect at 3:00 PM.
11 Press A/V WINDOW +/- to select “12” (channel);
then press RETURN.
The setting is complete.
Each time you press A/V WINIX)W V-, the channel
number changes from */*- "125" in sequence.
GCHANNEL BLOCK
►EVERY SAT
4:30PM IH CH 12
3
sfticT$ nriMi ctir(BID
At the specified time, "BLOCKED" appears in red on the screen,
and the picture of the specified channel Is blocked and the sound is
muted.
BLOCKED
=!
3
a
o'
8
Chapter 3: Using Advanced Features 59