Sony KV-27XBR25 - Manual (Page 47)

Selecting an MTS (Multichannel TV Sound) mode
Follow these instaictlons to select an MTS mode.
Select MAIN mode to listen to stereo sound.
The STEREO lair^ on the TV lights up whenever a stereo
broadcast is received.
Select SAP mode to listen to Second Audio Programs.
Select MONO mode to eliminate excessive noise during
stereo broadcasts, caused by a weak incoming signal.
Note
If №e TV is in video mode, the *MTS” display is shaded and cannot
be selected.
Press TV/VIDEO on the TV or on the Remote Commander to
change to TV mode.
Press AAf WINtX)W +/- until the cursor points to
“MTS."
Press RETURN.
The mode display turns red.
Press A/V WINDOW +/- to select the mode you want.
Each time you press A/V WINDOW +/-, “MAIN," “S/KP"and
“MONO" appear in sequence.
Remote Commander
1 Press MENU.
The main menu appears.
►QBPR06 PALETTE
EISMODE SET
©TIHE
BSET OP
CQENGUSH
uiiciÿ «TUM nunaa
Press A/V WINDOW +/- until the cursor points to
“MODE SET."
Press RETURN.
The mode is selected.
To return to the previous menu
Press A/V WINDOW +/- until the cursor points to
“ MENU."
Then press RETURN.
To return to the main menu
Repeat the above, until you reach the main menu.
To return to the normai screen
Press MENU on the Remote Commander.
&
§
Press RETURN.
The mode set menu appears.
ea
►S-VIOEO :0FF
MTS :MAIN
SPEAKER :0N
7NENU
Ct\apt«( 3-. U^ng Acfeanced f«atures 47