To return to the previous nnenu, To return to the main menu, To return to the normal screen – Sony KV-27XBR25 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5
Press RETURN.
The CH ERASE/ADD screen appears.
RETURN
ISCH ERASE/ADD
►ERASE
ADD
?
Select the channel.
ERASE:CHANNEL +/-
ADD:
[0-9]+[ENTER]
scucr^ MiuM miflnBi
Press A/V WINDOW +/- until the cursor points to “ADD."
QCH ERASE/ADD
ERASE
►ADD
Select the channel.
ERASE .-CHANNEL +/-
ADD:
[0-9]+[ENTER]
xiccr£ tcT«ii HtTflnin
To return to the previous nnenu
Press A/V WINDOW +/- until the cursor
points to“ MENU.*
Then press RETURN.
To return to the main menu
Repeat the atx)ve, until you reach the
main menu.
To return to the normal screen
Press MENU on the Remote Commander.
Note
If you add a VHP or UHF channel, the same
number cable TV channel Is also added
(and vice versa).
To add another channel
Repeat steps 7-8.
Press 0-9 and ENTER on the Remote Commander to select the channel
you want to add.
The channel display appears.
®(D@
mspuy y-v ewTER
EMTER
°b
@CH ERASE/ADD
ERASE
►ADO
?
10
Select the channel.
ERASE:CHANNEL
H-
ADO:
[0-9]+[ENTER]
siiccre aniM tiiTWmi
i
8
Press RETURN
A "+" slip) appears In front the channel number cttsplay, IndtcaUng that the
charnel Is added; then the CH ERASE/ADD screen automattcally reappears.
RETURN
@CH ERASE/ADD
ERASE
»•ADD
?
+
10
Select the channel.
ERASE:CHANNEL +/-
ADD:
[0-9]+[ENTER]
siucr$ KIM
niKBSD
Chapter 1: Setting Up
29