Sony SLV-790HF - Manual (Page 11)

Hookup 1: VCR setup
1
Set the RF UNIT switch to
CH 3 or CH 4 , whichever
cliannel is not used in your
area. If both are used, set the
switch to either channel.
For details, see page 69.
If you made A/V
connections (from page 8),
you can skip this step.
2 Turn on your cable box.
3
Press EASY SET UP on the VCR.
O The LANGUAGE menu appears. Change the
on-screen display language to French
—^ (FRANÇAIS) or Spanish (ESPAÑOL) if desired,
and press EXECUTE. For details, see page 29.
© The CLOCK SET menu appears. Select AUTO
and press EXECUTE. For details, see page 30.
© The CABLE BOX CONTROL menu appears.
Select ON. For details, see page 36,
O Enter vour cable box code number and press
cursor !-.
© Select your cable box
output channel and
press EXECUl’E.
■ s e t u p
CABLE BOX CONTROL
CABLE MOUSE ¡O N O FF
1 BOX CODE NO bl8i '
1 BO XO UTPUT-CH bH3
Use 1 0 select CABLE
BOXCH Then push ^X^Cy TE
Enter your CABLE_BOX
CodeNo.using 0-^ keys
Refer to the Ope rat mg
Manua t for the Code
SET UP IS don
Normal display
continued
Getting Started 11