Changing menu options, Menu choices, Set this option to – Sony SLV-790HF User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing menu options
Press MENU and select ADVANCED
OPTIONS.
2
Press CURSOR \! ♦ to select the option to change, then press CURSOR
to change the setting.
3
Press EXECUTE to return to the original screen.
Menu choices
Initial settings are indicated in bold print.
Menu option
AUTO ANT SEL
AUTO STEREO
DIMMER
AUDIO MIX
NORMAL AUDIO
TAPE SELECT
• AUTO TAPE SPEED
APC
SHARILNESS
Set this option to
ON
if your TV is connected only to VHF/UHF OUT on the VCR. To
play a tape , set the TV to the VCR channel (channel 3 or 4).
OFF if your TV is connected to both VHF/UHF OUT and LINE OUT
on the VCR. To play a tape, set the TV to the VCR input.
ON
to receive stereo programs, OFF to reduce noise. Tlie sound
changes to monaural.
ON to make the display window dim,
OFF
to make it brighter.
ON to listen to the sound recorded on hi-fi and normal audio tracks at
the same time. The AUDIO MONITOR button will not function.
OFF
to listen to hi-fi and normal audio tracks separately. Select the
sound using the AUDIO MONITOR button.
MAIN
to record the main sound on both hi-fi and normal audio tracks.
SAP to record the SAP (Second Audio I’rogram) sound on the normal
audio track. The main sound is recorded on the hi-fi audio track.
'-120" or ''-160" to select the tape length and display the remaining
time correctlv.
ON
to change the timer recording tape speed automatically to the EP
mode when the remaining tape becomes shorter than the recording
time, OFF to keep the tape speed.
ON
to switch on the APC (Adaptive Picture Control) function and
improve picture quality, OFF to switch off APC.
L (Low) through H (High) to adjust tlie sharpness of the picture. 1. to
turn off the sharpness control.
66 Additional Operations