Setting up cable box control, P il – Sony SLV-790HF User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ll
p
il
Setting up cable
box control
(Skip this section if you are
using Hookup 2, 3, 4 or 6.)
Your VCR includes a cable box control
feature that allows the VCR to control
most brands of cable Ixrxes/DSS
receivers via the Cable Mouse. With
cable box control, the VCR controls
channels on the cable box/DSS receiver
for timer recording. You can also use the
VCR's remote commander to change
channels on the cable box/DSS receiver
whenever the cable box/DSS receiver is
turned on even if the VCR is turned off.
To use cable bcrx control, you need to
connect the Cable Mouse (pages 10 and
22) and set the code number and output
channel.
This VCR is programmed with codes necessary to control channel
selection on most brands of cable boxes at the time this VCR was
manufactured. It is possible that new cable boxes may be introciuced
that cannot be controlled with this VCR's Cable Mouse. If you have a
cable box that is incompatible with this VCR, contact your cable
operator — they may he able to provide you with a compatible cable
box.
MENU
CURSOR
EXECUTE
Number
buttons
1 MENU Press MENU, then press CURSOR f/4 to
(
^ move the cursor (I) to CABLE BOX
CONTROL and press EXECUTE.
When using the EASY SET UP procedure,
skip this step.
CABLE BOX CONTROL
CABLE MOUSE
Use
[♦'♦'.t
o
select
Push
pEhiu
I
0 qu I
ON jOpn
CjH CURSOR
^ ^
Press CURSOR 4 ^ / ^ to select ON.
CABLE BOX CONTROL
CABLE MOUSE
BOX OUTPUT CH
ON
CHS
En te r your CABLE BOX
Code No using ^0-9] keys
Refer to the Operating
Manual for the Code
35 Getting Started