Attaching a uhfa/hf band mixer, Ohm coaxia cable – Sony SLV-790HF User Manual
Page 70
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
General setup information (continued)
Attaching a UHFA/HF band
mixer
When using both 75-ohm coaxial cable
and 300-t)hm twin lead cable for VHP/
UHF antenna, use the EAC-66 UHF/
VHF band separator/mixer (not
supplied) to connect the antenna to the
VCR.
75-ohm coaxia
cable
1
Loosen the screws on the mixer.
2
Wind the twin leads around the screws on the mixer.
3
Retighten the screws.
4
Connect the 75-ohm coaxial cable to the mixer.
70 Additional Information
Advertising