Basic editing, When recording on this vcr), Before you start editing – Sony SLV-790HF User Manual
Page 68: To stop editing, Tips
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
II PAUSE
• REC
Basic editing
(when recording on this VCR)
Before you start editing
• Turn on your TV and set it to the
video channel.
• Press INPUT SELECT to display "L2"
in the display window.
• Press TAPE SPEED on the remote commander to select the tape
speed, SP or EP.
1
Insert a source tape with its safety tab removed into the other
(playback) VCR. Search for the point to start playback and set it to
playback pause.
2
Insert a tape into this (recording) VCR. Search for the point to start
recording and press IIPAUSE.
3
Press #REC on this VCR and set it to recording pause.
4
To start editing, press the IIPAUSE buttons on both VCRs at the same
time.
To stop editing
Press the BSTOP buttons on both VCRs.
Tips
• To edit more precisely, press the IIPAUSE buttons on the VCRs to release pause.
• To cut out unwanted scenes while editing, pre.ss IIPAUSE on this VCR when an
unwanted scene begins. When it ends, press IIPAUSE again to resume recording
(Assemble Editing).
58 Editing