Antenna hookup, Use this hookup if you're using, Rear of tv – Sony SLV-790HF User Manual
Page 16: Vhf/uhf, Hookup 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Step 3: Hookups (continued)
Hookup 3
Pages 16 to 18 H
Antenna hookup
Make the following connections if you're using an antenna (if you don't
have cable TV).
□ Use this hookup if you're using;
• VHF/UHF antenna (you get channels 2-13 and channels 14 and higher)
• UFlF-only antenna (you get channels 14 and higher)
• Separate VHF and UHF antennas
Rear of TV
y
VCR
VHF'UMF
(
IN
b
OUT
VHF/UHF
- "" @ A Match the type of
connector on your
TV; A, B, or C.
VHF
OSS'
UHF
VHF
UHF
01
Use this hookup if you're using a VHF-only antenna (you get
channels 2-13 only)
Rear of TV
VHF/UHF
-------@ A
Match the type of
connector on your
TV: A, B, or C.
For connector types
B and C no UHF
connection is
required.
VHF
...............
UHF
or
VHF
..............
UHF
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so you can connect the cable to the VHF/UI IF IN
connector. If you ha\ e separate cables for VFIF and UHF antennas, you should use a
U/V band mixer (not supplied). For details, see page (s9.
16 Getting Started