Sony SLV-790HF - Manual (Page 57)

n l\
<• CUHSOH ^
DATE START STOP
I 7/4 THD - -- - - -
Set the date, start and stop times, channel
number and tape speed:
1 Press CURSOR to highlight each
item in turn.
2 Press CURSOR to set each item.
To correct a setting, press CURSOR to
return to that setting and reset.
To record the same program every day or the same day e\'ery week,
press CURSOR ■^. For details, see "Daily/weekly recording" on
page 55.
To record from a source connected to the LINE -1 IN or LINE -2 IN
jacks, press INPUT SELECT to display "LI" or "L2" in the "CH"
position.
3
CURSOR
Press CURSOR to confirm the setting.
The cursor (I) appears at the top of the line. To enter another
setting, move the cursor to the next line and repeat step 2.
4
EXECUTE
CD
Press EXECUTE.
CD
fiU
O
■D
(0
CD
Press POWER to turn off the VCR.
The TIMER indicator on the VCR lights up and the VCR stands by
for recording.
When using a cable box, leave it on.
o
3
Daily/weekly recording
In step 2 above, press CURSOR to select the recording pattern. Each time
you press CURSOR 4, tlfe indfcation changes as shown below. Press
CURSOR 4 to change the indication in reverse order.
the current date ■
-» EVERY MON -
the current date ♦ SUN-SAT —► MON-SAT -► MON-FRI -► EVERY SAT .
EVERY SUN —► 1 month later —»(cycles backward) -
Tips
To set the channel, you can also use the CH + /- or number buttons.
To set the tape speed, yoLi can also use TAPE SPEED.
When you are recording a program in the SP mode and the remaining tape becomes
shorter than the recording time, the tape speed is automaticallv changed to the EP
mode. Note that some noises will appear on the picture when the tape speed is
changed. If you want to keep the tape speed, set AUTO TAPE SPEED to OFF in the
a XDV'ANCED options menu (page 66).
To lock the VCR after setting the timer, see page .s4.
Note
If you are using cable box control, you cannot select "LI" or "L2."
Basic Operations 57