Audio/video (a/v) hookup, Use this hookup if your tv has stereo jacks, Notes – Sony SLV-N77 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Audio/video (A/V) hookup
If your TV has audio/video (A/V) inputjacks, you will get a better picture and sound
if you hook up your VCR using these connections. Fora true “home theater”
experience, you should connect the audio outputs of your VCR or TV to your stereo
system. If your TV does not have A^V inputs, see the following pages for antenna or
cable hookups.
If you are not planning to use your VCR to record programs, you finished setting up
the VCR after you have made the connections shown on this page. If you want to
record regular or cable TV programs, complete these connections first, and then go to
the following pages for antenna or cable hookups.
□ Use this hookup if your TV has stereo jacks
VCR
Stereo receiver
B Use this hookup if yourTV does not have stereo jacks
VCR
Stereo receiver
Notes
• To play a tape in stereo, you must use the A/V connection.
• If you do not have a stereo receiver, connect the white LINE OUT/AUDIO Ljack to the
AUDIO INjack on your TV.
Hookups 11