Plug the vcr into the ac outlet, Ac power cord to ac outlet 4, Notes – Sony SLV-N77 User Manual
Page 15: Hookup 2 : vcr setup
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Plug the VCR into the AC outlet.
The VCR automatically presets the VCR’s clock and TV channels when the VCR
is plugged into the AC outlet.
Hookup 2 : VCR setup
AC power cord
to AC outlet
4
©®
7
f fyv
The VCR starts presetting the clock and
channels.
When Auto preset is completed, the current
time appears in the display window.
You have now completed VCR setup.
To change the on-screen display language to French or Spanish, see
“Step 4 : Selecting a language” on page 17.
The clock is set using a time signal provided by some TV channels. If the clock
is incorrect, or “--:--” appears in the display window, see “Using Manual Clock
To add or disable channels manually, see “Presetting/disabling channels
Notes
• If you connect the AC power cord before the antenna connections are completed, the
channels may be incorrectly set. If this happens, see “Step 6 : Presetting channels” on
• Do not press any buttons on the VCR or remote commander during Auto preset.
• Auto preset starts automatically only when you plug in the AC power cord for the first time
after you purchase the VCR.
• Auto preset can be performed by pressing ■ STOP continuously for 5 seconds or more with
the VCR power turned off.
Hookups 15