Quick reference to using the vcr, Hookup 1, To play a tape – Sony SLV-N77 User Manual
Page 72: To record a program, To watch tv, Hookup 2, Hookup 3, Quick reference, To using the vcr” on the hack cover
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Quick reference to using the VCR
Hookup 1
To play a tape
1 Set the TV to channel 3 or 4
(or to video input, if you
made A/V connections).
2 Insert a tape and press
PLAY. If there is no
picture on your TV, press the
VCR’s TV/VIDEO button
until the VCR or VIDEO
indicator appears in the
display window.
To record a program
1 Press MENU and select
“Timer set/check.”
2 Set the channel, time, date,
and tape speed.
3 Press OK.
4 Insert a tape.
5 Press 1/1 to turn off the
VCR.
To watch TV
1 Turn off the VCR, or press
the VCR’s TV/VIDEO
button until the VCR or
VIDEO indicator in the
display window turns off.
2 Set the TV to the channel you
want to watch.
Hookup 2
To play a tape
1 If you made A/V
connections, set the TV to
video input. If you did not
use A/V hookup:
• Turn on the cable box.
• Set the cable box to channel
3 or 4.
• Set the TV to the output
channel of the cable box
(usually 2, 3, or 4).
2 Insert a tape and press
H PLAY.
To record a program
1 Press MENU and select
“Timer set/check.”
2 Set the channel, time, date,
and tape speed.
3 Press OK.
4 Insert a tape.
5 Press 1/1 to turn off the
VCR.
To watch TV
1 Turn off your VCR, or press
the VCR’s TV/VIDEO
button until the VCR or
VIDEO indicator in the
display window turns off.
2 Select the channel with your
cable box (if you have one)
or with your T
v
.
Hookup 3
To play a tape
1 Set the TV to channel 3 or 4
(or to video input, if you
made A/V connections).
2 Insert a tape and press
H PLAY.
To record a program
1 Turn on the cable box.
2 Set the cable box to the
channel you want to record.
3 Press MENU and select
“Timer set/check.”
4 Set the channel, time, date,
and tape speed.
5 Press OK.
6 Insert a tape.
7 Press 1/1 to turn off the
VCR.
Leave the cable box on.
To watch TV
1 Turn off your VCR, or press
the VCR’s TV/ VIDEO
button until the VCR or
VIDEO indicator in the
display window turns off.
2 Turn on your cable box.
3 Set the TV to the cable box
output channel (usually 2, 3,
or 4).
4 Set the cable box to the
channel you want to watch.
Sony Corporation Printed in China
AC68-01692A