To return to the previous step, To stop recording, To use the vcr after setting the timer – Sony SLV-N77 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
“OK” appears in the display window for about five seconds.
The TIMER indicator appears in the display window and the VCR stands
by for recording. When using a cable box, leave it on.
Press DIAL TIMER to complete the setting.
To return to the previous step
To return to the previous step, press the CHANNEL + and - buttons on the VCR at
the same time during any of the Dial Timer settings.
To stop recording
To stop the VCR while recording, press
■
STOP.
To use the VCR after setting the timer
To use the VCR before a timer recording begins,just press
1
/
1
. The TIMER
indicator disappears from the display window and the VCR switches on. Remember
to press
1
/
1
to reset the VCR to the timer recording standby mode af^er using the
VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 32).
• Display tape information on the TV screen (page 34).
• Check the timer settings (page 51).
• Watch another TV program (page 35).
38 Recording TV programs using the Diai Timer (SLV-N88 oniy)
DIAL TIMER