Sony SLV-N77 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Press Mm to move the cursor (►) to “Guide
channel setup,” then press OK.
^HGUODEMHUNNEISE
[GUIDE CH]
01 02 03 04 05
06
v
01 02 03 04 05
06
[TV CH]
Enter actual
receiving channel
Select : ♦♦ Set
: vv
End : OK Quit
: MENU
The upper row shows VCR Plus+ guide channels and the lower row shows
TV channels or cable box out put channels. Press </, to select the
l> ))))♦) channel number that does not match the guide channel.
If you made Hookup l o r 2 : Enter the actual number on your TV (and
VCR), then press M/m.
lll
+J
• If you made Hookup 3: Enter the cable box output channel (usually 2, 3,
or 4), then press M/m.
6
7
Repeat steps 4 and 5 for each channel number that does not match.
Press OK to confirm the setting.
8
Press MENU to exit the menu.
o
Setting up the VCR Plus+® system (SLV-N88 only) 29