Sony SLV-N77 - Manual (Page 8)

Controlling other TVs with the remote commander
The remote commander is preprogramed to control non-Sony TVs. If yonr TV is
listed in the following table, set the appropriate manufacturer’s code number.
^ Set »TV / VIDEO at the top of the remote commander to •TV
O Hold down 1/1, and enter your TV’s code number using the number buttons.
Then release 1/1.
Now you can use the 1/1, VOL +/-, CH +/-, and TV/VIDEO buttons to control your
TV You can also use the buttons marked with a dot (•) to control a Sony TV. To
control the VCR, reset •TV / VIDEO to VIDEO.
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find
the one that works with your TV.
TV brand Code number
Sony 01
Akai 04
AOC 04
Centurion 12
Coronado 03
Curtis-Mathes 12
Daytron 12
Emerson 03, 04, 14
Fisher 11
General Electric 06, 10
Gold Star 03, 04, 17
Hitachi 02,03
J.C.Penney 04, 12
JVC 09
KMC 03
Magnavox 03,08, 12
Marantz 04, 13
MGA/Mitsubishi 04, 12, 13, 17
NEC 04, 12
TV brand Code number
Panasonic 06, 19
Philco 03,04
Philips 08
Pioneer 16
Portland 03
Quasar 06, 18
Radio Shack 05, 14
RCA 04, 10
Sampo 12
Sanyo 11
Scott 12
Sears 07, 10, 11
Sharp 03,05, 18
Sylvania 08, 12
Teknika 03,08, 14
Toshiba 07
Wards 03,04, 12
Yorx 12
Zenith 15
8 Setting up the remote commander