Operation (when recording on this vcr), Before you start editing, To stop editing – Sony SLV-N77 User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operation (when recording on this VCR)
Before you start editing
• Turn on the VCR and the TV and set
it to the video channel.
^---------------------
X PAUSE
Press INPUT SELECT or
CHANNEL +/- to display “LI” or
“L2” in the display window.
Press SP/EP to select the tape speed,
SP or EP.
G D
n --------------------q
U
s i
5
o
• REC
^ Insert a source tape with its safety tab removed into the other (playback) VCR.
Search for the point to start playback and set it to playback pause.
O Insert a tape into this (recording) VCR. Search for the point to start recording
^ and press X PAUSE.
2 Press REC on this VCR to set it to recording pause.
^ To start editing, press the X PAUSE buttons on both VCRs at the same time.
To stop editing
Press the ■ STOP buttons on both VCRs.
Tip
• To cut out unwanted scenes while editing, press X PAUSE on this VCR when an unwanted
scene begins. When it ends, press X PAUSE again to resume recording.
>
a
a
5'
3
w
O
■o
(D
O
3
(/)
Editing with anotherVCR
59