Changing menu options 1, Menu choices, Changing menu options – Sony SLV-N77 User Manual
Page 57: Initial settings are indicated in hold print
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing menu options
1
Press MENU.
Press Mm to move the cursor (►) to “Advanced
options,” then press OK.
► Tape select:
[T120]
Auto play:
[ON]
Auto repeat:
[OFF ]
Auto power off:
[OFF ]
Power save:
[OFF ]
Select : vv
Set : Bb
End : OK
Quit : MENU
2 Press Mm to move the cursor (►) to the option to change.
^ Press </, to change the setting, then press OK.
C Press MENU to exit the menu.
Menu choices
Initial settings are indicated in hold print.
Menu option
Set this option to
Tape select
•
T-120
when using a T-120 or shorter length tape.
• T-160 when using aT-160 length tape.
• T-180 when using a T-180 or longer length tape.
For details, see page 34.
Auto play
•
ON
to start playback automatically, when you insert a tape
with its safety tab removed.
• OFF to turn off Auto play. You need to press PLAY to
start playback, even if you insert a tape with its safety tab
removed.
Auto repeat
• ON to play back a tape repeatedly. The VCR rewinds a tape to
the beginning and restarts playback automatically.
•
OFF
to turn off Auto repeat.
Auto power off
• 1Hr to turn off the VCR automatically one hour after the last
operation.
• 2Hr to turn off the VCR automatically two hours after the last
operation.
•
OFF
to set no specific time to turn off.
Power save
• ON to turn off the indicators in the display window during
standby mode to reduce the VCR’s power consumption to a
minimum.
•
OFF
to turn on the indicators in the display window while the
VCR is standing by.
>
a
a
5'
3
w
O
■o
(D
O
3
(/)
Changing menu options 57