Arc Machines 205 WDR - Manual (Page 26)

M O D E L 2 0 5
O P E R A T O R ’ S M A N U A L
22 22 22 22
2. SUPERVISOR: A Supervisor may load and run any weld schedule. In
addition, a Supervisor may create, change, delete, or copy a weld schedule.
3. PROGRAMMER: A Programmer has the same level of access as a
Supervisor and in addition can delete or change the Operator, Supervisor
and Programmer passwords, perform all Setup functions, calibrate the
Model 205 and create, change or delete languages.
TO SETUP A PASSWORD:
1. From the Home screen press SETUP.
2. From the ENTER PASSWORD screen enter the Programmer password.
3. Press CHANGE OPERATOR, SUPERVISOR, or PROGRAMMER
PASSWORD.
4. Enter the old password into the OLD PASSWORD field (or leave blank if
no password is assigned).
5. Enter the password into the NEW PASSWORD field.
6. Re-enter the password into the CONFIRM PASSWORD field.
7. Press ENTER.
8. Re-boot the system – from the Home screen press SHUTDOWN then
press YES on the Shut Windows screen. Wait for the screen to go blank
before turning off the circuit breaker.
TO DELETE OR CHANGE A PASSWORD:
1. From the HOME screen press SETUP.
2. From the ENTER PASSWORD screen enter the Programmer password.
3. You may now select which password to delete or change by pressing
CHANGE OPERATOR PASSWORD, CHANGE SUPERVISOR
PASSWORD or CHANGE PROGRAMMER PASSWORD and follow the
steps above. Setting blank fields in the NEW PASSWORD and CONFIRM
NEW PASSWORD fields will delete the password.
TO RESTORE A PASSWORD:
1. If you have lost or forgotten your password contact AMI Service
Department to obtain a one-day password. This will restore access to the
unit and allow you to set up new passwords.
LANGUAGE SELECTION
The Model 205 contains multiple pre-programmed languages. In addition, you may
customize a language or create a new language by replacing existing button names or
data entry titles with your own description.
Selecting one of the pre-programmed languages:
1. From the HOME screen press SETUP.
2. From the SETUP screen press LANGUAGE.
3. Select any of the languages displayed.