Arc Machines 205 WDR - Manual (Page 9)

M O D E L 2 0 5
O P E R A T O R ’ S M A N U A L
5 5 5 5
2.0 SPECIFICATIONS
These specifications pertain the to Model 205 power supply only. For weldheads, refer to the
specification sheet of each particular model. For non-AMI supplied equipment such as gas
tanks and regulators, refer to the original manufacturer’s documentation.
The Model 205 is a mobile system that is intended be hand carried. The supporting equipment
such as weldheads, water coolers, gas regulators, remote controls and extension cables can
also be hand carried. Items such as gas tanks and welding fixtures should be moved with
appropriate equipment and safety precautions. Gas tanks should be securely anchored to
prevent toppling over.
2.1 ELECTRICAL
INPUT POWER DETAIL
The Model 205 can operate on the following Auto Adjusting for Single Phase AC input:
Input Power
Single-Phase
AC
Rated Welding
Output
Welding
Amperage
Range
Max OCV
DC (Up)
Rated Peak
Starting
Voltage (Up)
Amperes Input
At Rated Load
Output, 50/60Hz,
Single-Phase
KVA
@
Duty
Cycle
KW
115 Volts TIG
100A @ 14.0
Volts DC, 100%
Duty Cycle
5 - 150A
90V
12-16
15 KV 18.4 2.1 2.1
20A
150A @ 16.0
Volts DC, 30%
Duty Cycle
5 - 150A
90V
12-16
15 KV 28 3.4 3.1
230 Volts TIG
100A @ 14.0
Volts DC, 100%
Duty Cycle
5 - 150A
90V
12-16
15 KV 8.3 2 1.9
20A 150A @ 16.0
Volts DC, 30%
Duty Cycle
5 - 150A
90V
12-16
15 KV 14.2 3.2 3.1
Input power must be grounded.
Chapter
2