Arc Machines 205 WDR - Manual (Page 46)

M O D E L 2 0 5
O P E R A T O R ’ S M A N U A L
42 42 42 42
3. Press EXPORT WDR FILE to select a WDR file and an export destination.
4. Press OK
Note
The OK button will ONLY be enabled when BOTH the Source and Destination fields are
filled. The Destination will normally be the D:\ drive which is the USB memory stick.
5. Repeat steps 3 and 4 to export additional WDR files.
6. Remove the USB memory stick and load on a PC to view / print the weld data
record(s).
Note
The exported weld data record(s) will be in *.csv format and can be opened in Microsoft
Excelor Notepad.