Arc Machines 205 WDR - Manual (Page 45)

M O D E L 2 0 5
O P E R A T O R ’ S M A N U A L
41 41 41 41
• Record Weld Data
1. Press RUN to return to the Weld screen.
2. Toggle WELD/TEST to WELD.
Note
The font on the WDR button turns yellow if Weld Data Recording is enabled AND Weld/Test
is set to Weld.
3. Press START to start the weld sequence and the Weld Data Recording
Note
The font on the WDR button turns red while the weld data is being recorded.
• Export Weld Data Record
1. Insert a USB memory stick into the USB port on the Model 205.
2. Press WDR to return to the Weld Data Recording screen.