Arc Machines 205 WDR - Manual (Page 58)

M O D E L 2 0 5
O P E R A T O R ’ S M A N U A L
54 54 54 54
6.2 OPTIONAL REMOTE PENDANT
• Allows for the remote START/STOP of a weld sequence, JOG of the weldhead rotor,
manual gas PURGE, and return to HOME of the weldhead rotor.
• Attach the remote pendant connector to the REMOTE connector
on the Model
205. Note the positioning keyway and NEVER FORCE or use tools on the cable
connectors. Hand-tighten the connecting ring being careful not to cross-thread the
ring.
Note
The EXEL RDR-005 rotor driver contains a built-in remote pendant which is fully
functional with the Model 205.
Note
The remote pendant cannot be connected if an M21 weldhead is being used.
Note
For additional available options, such as extension cables contact Arc Machines, Inc.