AVer XR8032_RACK - Manual (Page 37)

31
2. User can adjust the capacity of partition by clicking Capacity column and enter the capacity. If user
doesn’t want to divide hard disk into several partitions, and then, just leave the capacity without change.
3. The partition can be named by clicking on Label column and enter the name.
4. To create more than one partition, do the steps 1 and 2 again.
5. When all the partition has been added, click Start to format all partitions.
6. When the formatting complete, the each partition status will change to OK.
7. Click
OK to exit when formatting is completed.
8. Now, user can assign formatted hard disk or partition as a storage path( see also Chapter 3.1 System
setting(1)Storage Path )