AVer XR8032_RACK - Manual (Page 58)

52
is no motion, it records at the minimum frame rate.
- Voice Detecting Recording
DVR system will record when the voice exceeds the intensity value in Voice Detection setting.
- No Recording
The system won’t do any recording.
(3) Motion Detection
Adjust the sensitivity of the motion detector. The higher the value, the finer the sensitivity is detected. When it
detects a motion, a green triangle mark would appear at the upper left corner of the screen.
Click Advanced button to select the area for motion detection. Click Region 1/2/3 button, and then,
click-and-drag an area on camera screen for motion detect. To adjust motion detect sensitive, scroll the
Sensitivity 1/2/3
bar. Click OK to save and exit the setting window. To reset all setting, click Default.
(4) Voice Detection
Adjust the intensity of the audio detector. The system detects sound when it exceeds the intensity
value. Click Test button to test the voice detection setting.
(5) Mask/Shield Edit
Mask, mark an area on the screen to disregards the motion in the marked area and to only monitor outside the
marked area.
1. I n the Mask/Shield Edit section, activate the Enable Mask check box.
2. In the Edit section, select Mask click the ~ button.
3. Click and drag a frame on the (6) Video Screen to create Mask area.
4. To show and change the color mask, enable the Show Mask check box.
5. In the Color section, select the color and click ~button.
(6) Video Screen
Preview the selected camera live video.
(7) Group
Click to view the camera group that user has been setup in Camera setup (see also
3.2.3 ).
(8) Camera
Click to view the camera live video on (6) Video Screen.