AVer XR8032_RACK - Manual (Page 89)

83
6.1.1 To Setup Remote System Setting
There are two type of remote setup mode – Basic Setting and Advance Setting. Select the setup mode and click
OK
to enter setup window.
Basic Setting
Click OK to exit and save the setting and Cancel to exit without saving the setting. The setting here applies to
Remote DVR only.
(1)
(2)
(3)
(4)
(5)
(6)
(1) Camera Name
Select the camera you want to adjust the settings.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we suggest disabling
it so that the system won’t detect it as video loss error.
(3) Camera Name
9 Display
Enable/disable to show the video. Even if the video of the selected camera is hidden you can still record
the video and preview it in playback mode.
9 Name
Change the camera name.
9 Description
Add a short comment.
(4) Enable Deinterlace
Enable to enhance the video quality. Set the Enable Deinterlace mode to #1, if you are capturing motionless
picture and #2, if it captures lots of movement.
(5) Quality
Adjust the video quality. The higher the value, the lower the compression level and uses more hard disk space.
(6) Frame Rate
Set the number of images per second of the video to be recorded. The frame rate ranges from 1 to 30 for NTSC
and 1 to 25 for PAL. The higher frame rate, it uses more hard disk space.