AVer XR8032_RACK - Manual (Page 50)

44
9 Transcode by MPEG4 Encoder: Decoding the video and compress video again by using MPEG4
encoder.
- Preview Setting
9 Decode key frame for Preview: When selected the Save Original Format selection, user can mark
Only decode key frame for Preview this option. When previewing video, DVR system only shows
key frame and one frame per second.
9 Enable live display performance optimization:
- Schedule Connect
User can select a certain date and time to connect with IP camera. The blue block means connect with
IP camera and the white block means disconnect with IP camera. Select the connection status (blue or
white) and click the date and time block to set the connection schedule.
- I/O Control
To setup the sensor and relay devices that is installed on IP camera.
9
Sensor Setting
To setup sensor that is embedded on the camera.
1. Click the drop-down list and select the sensor ID number.
2. Enter sensor name in Name column
3. The system automatically detects the camera and input relates information. In the Content section,
enter sensor description.
4. In the test section, click Test to check the sensor status. Red is high and Green is low.
5. Click OK to exit and accept the setting and Cancel to exit without saving the setting.