AVer XR8032_RACK - Manual (Page 41)

35
3.1.1 To Set the POS Setting
General Setting
1. In the System Setting dialog box, POS section, click Setting.
2. In the POS Console Setting dialog box, click Add to set a new POS setting, Modify to change the POS
setting, and Delete to remove the selected POS setting. Click OK to save and close POS Console Setting.
3. In the POS Mapping dialog box, click OK to accept the settings and Cancel to exit without saving the new
setting.
(1)
(2)
(3)
(6)
(7)
(8)
(4)
(5)
(1) POS Name:
Enter a name to identify the POS.
(2) Protocol:
To select the protocol, click Setting button (see Setup POS Protocol)
(3) Skip first: Set the number of lines you want to be removed
(4) Start Testing: Click to test POS setting. You will see a test result on the right side of POS Mapping
window.
(5) Setup…: Set the COM Properties. If you are not sure, please contact your POS service provider.