AVer XR8032_RACK - Manual (Page 43)

37
Setup POS Device
There are 4 default POS devices. If user uses the POS device beside defaults, user can add new POS device
and rules. The POS device can be added up to 50 include defaults.
Setup Standard POS Device
•
Add New POS Device
1. Click Add
2. Enter the POS device name in Name column
3. Select the Type as Standard
4. Click OK to save
5. To modify existing device, double click it.
6. Click Default can be reset back to original setting.
•
Add Rules
1. Select the POS device form device list
2. Click Add in Rules section
3. In Rule Setting windows, select Group. Each group has a limited
number of times ; please refer to the “Maximum” and “Remainder” information in Rule Setting windows. The
Line End, Page End, and Bill End group only can be set once.
- Line End: set a rule to separate each line.
- Page End: set a rule to switch page.
- Skip Cmd: set a rule to discard a string or character.
- Include: set a rule for a lime with a string or character to be displayed.
- Exclude: set a rule for a line with a string or character to be concealed.
- Bill End: set a rule to divide each transaction.
4. Select Type – Ascii or XML
5. Enter the string or character as the rule in Data column. The maximum length is 31 characters.
6. Click OK
7. Click Save. The configuration will be lost without saving.
8. To modify existing replace rules, double click it.