Salter Brecknell APD-100 - Manual (Page 12)

12 APD-100 Automatic Powder Dispenser User Instructions
Introduction
2 Introduction
2.1 APD-100’s Display and Keypad
The APD-100 (Automatic Powder Dispenser) front panel is shown in Figure 2.1 .
Figure 2.1 APD-100 Front panel
Below is a brief description of each key’s function:
NEW Press to input and store NEW powder formula
CAL Press to CALibrate the scale with 30g, 50g or 100g test weight
EDIT Press to EDIT stored powder formula
RECALL Press to RECALL stored powder formula
ON/OFF Press to turn the APD-100 ON or OFF
AUTO REPEAT Press to enter to or exit from the AUTO REPEAT dispensing mode
POWDER Press to select the type of POWDER
ZERO/EXIT Press to ZERO the scale, or exit from input/setting mode
UNIT/SETUP Press to change the UNIT of weight, or enter SETUP mode
ENTER/PAUSE Press to confirm your input/choice or PAUSE dispensing
BACKSPACE Press to delete last input character
FAST/▲ Press to FAST dispense in manual mode, or select last item
TRICKLE/▼ Press to TRICKLE (slowly) dispense in manual mode, or select
next item
CANCEL/STOP Press to delete all input characters, or STOP dispensing
MEM#/. Press to use MEMory location number to recall powder formula, or
input decimal point.
0-9 / A-Z Press to input numbers (0-9) or alphabet (A-Z)