Heading3 - 3.11.4 to set the alarm, Heading3 - 3.11.5 limit indicators, 4 to set the alarm – Salter Brecknell S122 User Manual
Page 24: 5 limit indicators, 01b 00b
Advertising
24
S122
User /
Service Instructions
3 Using the
scale
3.11 Checkweighing
3.11.4 To set the alarm
Example:
beep
when between targets
The target beep can be:
00 = No target beeps
01 = Beep when between targets
02 = Beep when outside targets
3.11.5 Limit indicators
Whil
e
using the scale you will see the following indicators to tell
you the status of the check-weighing:
The weight/number of items is below the lower limit.
The weight/number of items is between the upper and lower
limit.
The weight/number of items is above the upper limit.
0
To change the displayed value:
To move along the display:
01b
00b
To enter the alarm setting:
ENTER
ENTER
LOW
OK
HIGH
Advertising