Salter Brecknell S122 - Manual (Page 45)

45 S122 User / Service Instructions
5 Configuration Mode 5.6 F3 - zero display setting
5.6 F3 - zero display setting
MUST BE SET TO 0 AT LEGAL FOR TRADE SCALES.
● If the load cell gives unstable readings set to 5 which is
the maximum.
● If the load cell gives stable readings set to 0 which is the
minimum.
● Ensure the hold function (F8) is set to hold 0.
Zero display setting
0 =
default zero display reading within
1 division
2 = zero display reading within
2 divisions
3 = zero display reading within
3 divisions
4 = zero display reading within
4 divisions
5 = zero display reading within
5 divisions
To change the value:
3 times
F3
ENTER
2Ero0
2Ero1
ENTER
F3