Salter Brecknell S122 - Manual (Page 38)

5.3 F0 - weight calibration 5 Configuration Mode
S122 User / Service Instructions 38
5.3 F0 - weight calibration
● Ensure the hold function (F8) is set to hold 0.
Please remember .....
The calibration weight must be over 0 weight or any weight
less than the full capacity of the machine.
To change the unit of
calibration:
To change the flashing digit:
To go to the next digit:
ENTER
2Ero
ENTER
0--.--C kg
Unit of calibration
--.--C
lb
0
New unit of calibration
1--.--C kg
lb
ENTER
10-.--C kg
lb