Heading1 - 5 configuration mode, Heading2 - 5.1 entering configuration mode, Entering configuration mode – Salter Brecknell S122 User Manual
Page 34: Service mode keys, 5configuration mode, 1 entering configuration mode
Advertising
5.1 Entering configuration mode
5 Configuration Mode
S122
User /
Service Instructions
34
5
Configuration Mode
5.1
Entering configuration mode
In order to enter configuration mode you must first set the
configuration switch to the unlocked position. The switch is
located under the tamper proof seal above the serial comm
unication
socket on the right-hand side of the head.
Set the configuration switch to
the unlocked position.
Locked position
Unlocked position
Advertising