Salter Brecknell S122 - Manual (Page 35)

35 S122 User / Service Instructions
5 Configuration Mode 5.1 Entering configuration mode
5.1.1 Service mode keys
The following keys are available in service mode:
Accept the entered values and go to the next section.
Cancel all values for the current display.
Go to the next digit or field.
Increment the value of the current (usually flashing) digit.
Go to previous digit
Whil e the test is displayed,
press and hold the key until you
see ...
ZERO
Release the key.
TARE
CLEAR ENTRY
ENTER
ZERO