5 exit the setup menu, Exit the setup menu – Salter Brecknell PS2000 User Manual
Page 26
Advertising
24
PS1000/2000 User Instructions
4.5 Exit the Setup Menu
1.
Power off the indicator by pressing and holding the [ZERO/ON/OFF] key.
2.
Move the slide switch on the rear cover back to the left and replace the metal
protective plate. Refer to section
3.
Turn the indicator back on by pressing the [ON] key. The display will go
through a digit check, then settle into Normal Operating mode. All front panel
keys will now return to their normal mode of operation.
Advertising
This manual is related to the following products: