3 sources of danger, 1 dangers due to electrical power, 13 commissioning – CASO Germany EO27 User Manual

Page 54: 1 safety information, 2 delivery scope and transport inspection, Danger, Warning

Advertising
background image

caso EO 27

54

12.3 Sources of danger

12.3.1

Dangers due to electrical power

Danger

Mortal danger due to electrical power!

Mortal danger exists when coming into contact with live wires or
subassemblies!

Observe the following safety notices to avoid dangers due to electrical
power:
► If the connection lead is damaged, you will need to have a special

connection lead installed by an authorized electrician.

► Do not operate this device if its power cable or plug is damaged, if it

does not work properly or if it is damaged or has been dropped. If the
power cable is damaged, it will need to be replaced by the manufacturer
or his service agency or a similar qualified person, to avoid any
dangers.

► Do not open the housing on the device under any circumstances. There

is a danger of an electrical shock if live connections are touched and
the electrical or mechanical structure is altered. In addition, functional
faults on the device can also occur.

13 Commissioning

This chapter provides you with important safety notices during the initial
commissioning of the device. Observe the following notices to avoid
dangers and damages:

13.1 Safety information

Warning

Personal and property damages can occur during commissioning of
the device!

Observe the following safety notices to avoid such dangers:
► Packaging materials may not be used for playing. There is a danger of

suffocation.

► Transport, unpack and use two persons to set down the device because

of the heavy weight of the device.

13.2 Delivery scope and transport inspection

As a rule, the oven is delivered with the following components:

• Oven
• Baking sheet

Advertising